• 中文核心期刊要目总览
  • 中国科技核心期刊
  • 中国科学引文数据库(CSCD)
  • 中国科技论文与引文数据库(CSTPCD)
  • 中国学术期刊文摘数据库(CSAD)
  • 中国学术期刊(网络版)(CNKI)
  • 中文科技期刊数据库
  • 万方数据知识服务平台
  • 中国超星期刊域出版平台
  • 国家科技学术期刊开放平台
  • 荷兰文摘与引文数据库(SCOPUS)
  • 日本科学技术振兴机构数据库(JST)

FAST30m模型L-波段馈源的设计、制作和性能测试

Design、Manufacture and Test of the L-band Feed for the FAST 30m Demonstrator

  • 摘要: 叙述了FAST(500m口径球面射电望远镜)30m模型L-波段馈源的设计、制作和性能测试过程。馈源的设计仿真使用了HFSS软件,并选用纸板或塑料板和铝箔胶带,通过手工操作完成馈源制作。馈源的性能通过测试表明满足FAST30m模型天文观测的需要。文中采用的HFSS软件仿真及手工制作馈源的方式不失为形式简单的馈源的模型制作的一种快速、经济和有效的方法。这种方法对相近的工作有一定的参考价值。

     

    Abstract: In this paper, the design, manufacture and test of the L-band feed for the FAST 30m demonstrator are presented. The HFSS is used for the simulation during the design. The feed was made by hand using cardboard, plastic borad and adhesive aluminum foil tap. The test measurement shows that this manually made feed meets the required specificaion of the FAST 30m demonstrator. The design using the HFSS and manufacture by hand might be a fast, economical and effective method for producing simple feed and may be helpful to other similar work.

     

/

返回文章
返回