Citation: | Leng Shengquan. A Design of Drive Turn Up Glass-Fibre Astrodome[J]. Publications of the Yunnan Observatory, 1986, (2): 100-115. |
[1] | Jin Jianhui, Li Binhua, Chen Xiaoming. Analysis of Driving Circuit and Design of PCB for Electron Multiplication of EMCCD [J]. Astronomical Research and Technology, 2012, 9(3): 316-322. |
[2] | MAO Yao, BAO Qi-liang, MA Wen-li, YIN Yi-lin. Driving System Design for 1.2 m Alt-Az Telescope and Synchronized Control for Multi-motor [J]. Astronomical Research and Technology, 2006, 3(3): 289-294. |
[3] | Xia Lixin. Evaluation For Drive Precision of Large Telescope [J]. Publications of the Yunnan Observatory, 1999, 0(S1): 114-119. |
[4] | Du Hong, Yang Kaiping. Development of A Reflection Dish Antenna of the Glass Fiber Reinforced Plastic [J]. Publications of the Yunnan Observatory, 1992, 0(1): 69-72. |
[5] | Hua Jiajun. A Modern Design of Telescope Drives [J]. Publications of the Yunnan Observatory, 1988, 0(3): 88-96. |
[6] | Len Shengquan. A Design of Machine Drive of An Astrodome Having Simultaneous Turning and Translational Motion [J]. Publications of the Yunnan Observatory, 1985, 0(1): 105-114. |
[7] | Wu Guangjie. An Improvement on the Glass Cutter Used in a Darkroom [J]. Publications of the Yunnan Observatory, 1983, 0(1): 68-69. |
[8] | Leng Shengquan. Introduction of the Design of the Mechanically Driven Device for Opening An Astrodome [J]. Publications of the Yunnan Observatory, 1983, 0(1): 59-67. |
[9] | Len Sheng quan. The Improvement of the Friction Drive for A l0-meter Astrodome [J]. Publications of the Yunnan Observatory, 1982, 0(2): 56-59,55. |
[10] | Leng Shengquan, Lu Ruining. The Design and Adjustment of the Wire Rope Driver Making the Movable Window of an Astrodome Made of Glass Fibre Reinforced Plastic Slide and Open Back and Forth [J]. Publications of the Yunnan Observatory, 1982, 0(1): 57-64. |